Blog > Configuration

Home Forums ViewPort Configuration

This topic contains 1 reply, has 2 voices, and was last updated by  Hanno .

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #10686


    I’m getting a configuration error, "Failed to configure … " I have checked the cock settings. I Have a nice new usb cord. I’m using tutorial 01, "Four Bit Counter". I have also checked the speed of the usb port and set it so that it matches the speed set in viewport. I have used 9600 and 460800, I’m unable to set my usb port to the viewport default of 1,000,000. I am at least able to load the tutorial but I can’t connect after loading. Not sure what to try next. I may be having trouble because I’m running viewport in win xp using a virtual machine. Any suggestions?



    I’ve had some luck with VMware, but mostly serial ports don’t seem to be well supported under virtual machines due to timing issues that the Prop requires.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.