Blog > device.xml Home › Forums › 12Blocks › device.xml This topic contains 1 reply, has 2 voices, and was last updated by Hanno . Viewing 2 posts - 1 through 2 (of 2 total) Author Posts September 13, 2012 at 4:36 pm #10718 Anonymous I just purchased 12 Blocks and I see that the P8X32A QuickStart Board is not one of the device types. So I wanted to create a device.xml and directory for it, which I did. I took the demoprop board and changed it for this one. Thing is what are the elements I can use to define things in the device.xml I would like to define the push buttons and the leds on the Quickstart, but I am unsure how. Any help with this would be great. Thanks, JT September 20, 2012 at 6:37 am #11858 HannoKeymaster Hi! I just got a quickstart and am working on properly supporting the led’s and switches with 12Blocks. For now, use the DemoBoard profile and use the "pin->toggle/high/low" blocks for the led’s and the "pin>io" block to read the switches. Hanno Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.