Blog > 12Blocks, Arduino, MEGA2560, PUTTY, terminal > Input value in Terminal

Home Forums 12Blocks Input value in Terminal

This topic contains 0 replies, has 1 voice, and was last updated by  Anonymous .

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #12498

    Anonymous

    Hello All,

    New to 12Blocks and I just have a quick question. Using an Arduino Mega, what blocks do I use to input data(read serial) through the 12Blocks terminal or PUTTY from connected computer.

    A little background…I have a test device which uses an Arduino Mega with numerous outputs to several custom PCB interface boards to the D.U.T. I would like to use PUTTY for Serial INPUT to the Arduino to allow the user to select which TEST Sequence (ie TEST001, TEST00#) for the MEGA to execute, and still have serial output to the PUTTY terminal session.

    “Good judgement comes from experience, experience which usually was the result of poor judgement.” -Wojciech Kurtyka

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.