Blog > NEW AND HAVE QUESTION

Home Forums 12Blocks NEW AND HAVE QUESTION

This topic contains 1 reply, has 2 voices, and was last updated by  Hanno .

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10650

    Anonymous

    Ok just started using the Propeller and 12b. This is my first project using anything other then ladder logic. So I’m not familiar to Spin or other programs and languages. I like the idea of 12B and how it looks. But it seems to be lacking in basic logic. I can not for the life of me figure out how to set a pin as an input. I can make the leds flash and stuff all day but can’t make one of the buttons turn lights on and off extra…. if it makes a difference I’m using the quick start board.

    #11678

    Hanno
    Keymaster

    Hi!
    The "pins" section of the library has all sorts of "in" blocks to:
    - count edges
    - measure frequency
    - detect digital hi/low
    - shift data in
    - read serial data
    - and read i2c.
    Enjoy!
    Hanno

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.