Blog > weird problem with 2.08

Home Forums 12Blocks weird problem with 2.08

This topic contains 1 reply, has 2 voices, and was last updated by  Hanno .

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #10670


    Ok. I have a weird problem. I have uninstalled, and rebooted, prior to installing 2.08. I am getting the error shown in the picture below when I run my sensor program. It run fine in 2.07. I also get this in the error log..

    Reset Reset:Propeller v1 on COM4
    Reset Reset:Propeller v1 on COM4
    Wrote 28644 bytes!
    Waiting for reply
    Received reply of 254 after 4,1
    Opening connection to COM4 at 1000000
    Sent request for configuration
    Sent request for configuration
    Timed out during configuration
    Cfglen=0, FoundCfgMarker=0, CfgMismatch=-1, Read=0

    Not sure what is wrong now, but I cant download and run on this version. 2.07 would download fine. I can take the code as a spin file, and compile, and download in the prop tool, and the program works fine. Any ideas on whats up?



    Hi Max,
    That’s not good Loading/connecting shouldn’t have changed between 2.07 and 2.08. Can you attach the picture you referenced and ideally your .12b file? Do other .12b files work? I assume you have a standard PC, running Win7, and 5MHz Propeller board? Library is set to DemoBoard?

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.